Loading a snowmobile into a truck requires a ramp that should be strong enough to bear the weight of a snowmobile. The ramp should not damage the snowmobile or any of its parts. And the ramp should be portable (foldable), so you can carry it along with your snowmobile in your truck.
It is what I have learned about ramps after having some damage to my snowmobile. I have seen people using weak or unbalanced ramps for loading their snowmobiles into the trucks. They often end up damaging their snowmobiles and the tailgate of their trucks.
Before buying a ramp, you need to know one thing. You must know the exact weight of your snowmobile. You can check it online or in the user manual of your snowmobile. The ramp must have a load capacity higher than the weight of your snowmobile.
The ramps that are 60 inches long are to be used for trailer loading only. You might be able to use them with a few trucks that have lower tailgate height. I recommend it is better not to take the risk.
Best Picks for Truck Loading
The best snowmobile ramp that I have used is the Caliber Tri-Fold ramp. It is made of aluminum and features Caliber LowPro glides at the side panels for the skis.
You can buy this ramp only for $500 on Amazon, but if you have a studded track on your snowmobile, then you should buy this ramp with stud protectors. The ramp with the stud protectors cost under $700 on Amazon.
If you want a budget-friendly option, then Ruedamnn’s tri-fold ramp is the best choice. It has polyethylene conveyor protectors for the ski. It does not come with stud protectors, and if your snowmobile’s track is studded, you can buy Caliber stud protectors.
The ramp costs $370 on Amazon, and the stud protectors cost an additional $50. It makes a total of $420. For added safety, you can install Caliber edge glides at the bottom end of the ramp. It will cost you $60 more, but it will be a precaution for skis.
Even after adding edge glides and the stud protectors, it costs $480.
Above mentioned ramps are good at loading snowmobiles into the truck’s bed or at the deck.
Best Pick for Trailer Loading
If you want a ramp for a trailer, the Black Ice snowmobile ramp is the best that you can buy right now. It costs $425 on Amazon, for the whole package.
It comes with LowPro glides for ski protection and stud protectors if you have a studded track. You can also use this ramp to load your snowmobile into a truck’s bed if the tailgate of that truck is up to 30 inches high.
Best Picks for Snowmobiles with Non-Studded Tracks
Caliber Pro Bi-Fold ramp can be used to load snowmobiles that are up to 40 inches wide. It means you can use it for small to medium-sized snowmobiles.
It is not a good option for snowmobiles with studded tracks. It is because the centerline of this ramp does not has glides to protect the studs. It costs $625 on Amazon for this ramp.
For snowmobiles with non-studded tracks, Bosski’s RevArc ramp is another good option. This ramp is specially designed for snowmobiles only. The ramp is in the shape of an arc, which lowers the speed while loading.
The side panels have plastic glides to protect the ski runners. And it comes with an extension ladder.
However, it does not has any stud protector, so do not use this ramp to load snowmobiles with studded tracks. You can add after-market stud protectors, but it will void the warranty.
It costs $460, and comes with a lifetime warranty. The warranty has conditions that you have to follow to keep the ramp under warranty.
Best Truck/Trailer Loading Ramps for Snowmobiles
Here is a brief comparison of all the recommended snowmobile ramps. Below the table, you can find the detailed reviews of each snowmobile ramp.
Best Snowmobile Ramps
| Snowmobile Ramps | Length X Width (inches) | Load Capacity (lbs) | Ski glides | Stud protectors | Buy |
|---|---|---|---|---|---|
Caliber CBR-RAMP-PRO | 90 X 52 | 1500 | Yes | Optional | See at Amazon |
Ruedamann Tri-Fold Ramp | 85 X 54 | 1500 | Yes | No | See at Amazon |
Black Ice 60 X 54 | 60 X 54 | 1500 | Yes | Yes | See at Amazon |
Caliber Pro Bi-Fold | 94 X 40 | 1200 | Yes | No | See at Amazon |
Bosski RevArc Tri-Fold | 90 X 49.5 | 1500 | Yes | No | See at Discount Ramps |
Caliber CBR-RAMP-PRO Tri-Fold – Link to Amazon
Caliber is a well-known brand in power-sport ramps, and CBR-RAMP-PRO is the best offering from them. It is designed for loading snowmobiles into trucks.
This snowmobile ramp is 90 inches long and 52 inches wide. You can fold the ramp, and it will become only 26 inches wide, which can easily fit in your truck’s bed.
It is made out of aluminum and weighs only 44lbs. It has a load weight of 1500 lbs, which is enough to load any snowmobile.
The outer panels have LowPro grip glides, which reduce friction. It also prevents any damage to the ski runners.
To secure the ramp with the truck, it has a self-retractable strap. The strap hooks to the truck and prevents the ramp from slipping. The top end of the ramp is like the fingers; Caliber also calls it RAMP FINGERS. They are rubber-coated and inclined to connect with the tailgate or the deck of the truck.
The ramp costs $500 on Amazon, but if you add the extension, it will cost you $680. The extension is about 30 inches long, which connects with the center panel. It is a ladder that provides more traction while loading a snowmobile into the truck.
Instead of an extension ladder, you can add the stud protectors. It will cost you $700 on Amazon for this ramp and the stud protectors. If you have a studded track, you should buy the stud protectors. Otherwise, the studs will bend or break.
Using this ramp is easy, and it allows you to safely load your snowmobile in a truck’s bed or at the truck’s deck.
The complete package will cost you $765 on Amazon. That includes the ramp, the extension ladder, and the stud protectors.
Ruedamann Tri-Fold Loading Ramp – Link to Amazon
This ramp by Ruedamnn is another good option if you want a ramp for loading snowmobiles into a truck. It has polyethylene conveyor protectors that protect the skis while loading.
The ramp is 85 inches long and 54 inches wide. When the side panels are folded, it becomes 27 inches wide for easy storage.
It has a load capacity of 1500 lbs. So, you can load any small to large-sized snowmobile into the truck.
There are two straps with hooks to secure the ramp with the tailgate or the deck. Using both of the straps is enough and does not require anything else.
The hinges of the ramp are fixed with rivets and welding, which gives more stability. They will not break easily.
There are no stud protectors on the center panel. Even if the track of your snowmobile is not studded, I always recommend using the stud protectors. Besides protecting the studs, they also increase traction for the snowmobile.
There are anti-slip plugs at the bottom, which are made of plastic. They are good to prevent slippage, but they do not provide an inclined slope for the skis. I recommend using Caliber Edge Glides, which makes a smooth slope for the snowmobile to glide over.
The head plate is fixed with rivets, and it has plastic on it. It protects the paint job at the tailgate of the truck. It also makes it easy to lift the ramp as the edge of the head plate will not scratch our hands.
You can use this ramp to load your snowmobile in your truck’s bed or on the deck.
The ramp costs $370 on Amazon, and if you want the edge glides, it will be $60 more. And do not forget the stud protectors, it costs $29 for 6-grips. For this ramp, you will need two sets of ramp grips.
That makes a total of $370 + $50 + $60 = $480. So, for less than $510, you can have a ramp to load your snowmobile into your truck’s bed or the deck. It is cheaper than many other options.
Best Ramp for Trailer Loading
Black Ice Snowmobile Ramp – Link to Amazon
This ramp by Black Ice is for trailer loading. It includes a center track extension, and the center panel has stud protectors, including the extension.
It is made out of high-strength aluminum, which has a load capacity of 1500 lbs.
The ramp is 60 inches long and 54 inches wide. As it is a trifold ramp, you can fold b side panels, and it will become 17.5 inches wide for easy storage.
The extension ladder also is 60 inches long and 18 inches wide. It connects with the center panel of the ramp and provides more traction to the snowmobile.
This ramp has rubber-coated fingers that connect the ramp with the trailer. The fingers are inclined to match the angle of the trailer. However, the bottom part of the ramp is straight, and I recommend using edge glides such as Caliber edge glides that protect the skis.
It has two cam buckle straps that provide added security and prevent any damage. The straps secure the ramp with the trailer.
This ramp is designed for snowmobiles, and it has 12 inches wide ski glides at the side panels. The glides are crucial to reduce friction and prevent any damage to the ski runners.
You can also use this ramp to load snowmobiles into trucks. But, you must keep in mind that the truck’s bed should not be more than 35 inches.
At $425 on Amazon, it is a complete package to load a snowmobile in a trailer or a truck. As it has stud protectors, you can also use this ramp if your snowmobile’s track is studded, and it will not damage the studs.
Best Ramp for Snowmobiles with Non-Studded Tracks
Caliber Pro Bi-Fold – Link to Amazon
The Caliber Pro Bi-Fold ramp is a good option if the skis of your snowmobile are less than 40 inches wide.
It is 94 inches long and 40 inches wide. The width limits its usability to small and a few medium-sized snowmobiles. When folded, it is 20 inches wide, which is2 inches wider than the tri-fold ramps by caliber.
It is made of heavy-duty aluminum and weighs 55 lbs. It has a load capacity of 1200 lbs, which is suitable for small to medium-sized snowmobiles.
This ramp features Caliber Lowpro Glides that protect the ski runners and the skis. It also increases traction for the track.
It is not a good option for studded tracks because there are no glides or stud protectors. It is a point where both panels connect.
It has a carrying handle that is a strap with a plastic handle at the center. You can carry the ramp with only one hand.
To secure the ramp with the truck, it has retractable straps. They connect the ramp with the tailgate or the deck.
At $625 on Amazon, it offers a complete package for snowmobiles with non-studded tracks. It is easy to carry and store and features Calibre LowPro glides by default.
Bosski RevArc Tri-Fold Snowmobile Ramp
Bosski RevArc Tri-Fold ramp is made of lightweight and high-strength aluminum. It is strong and works well.
It is 90 inches long and 49.5 inches wide. It is specially designed for snowmobiles, and you can not use it for loading ATVs or other vehicles into your truck.
You can fold it, and it will become 22 inches wide for easy storage and portability. It has a loading capacity of 1500 lbs.
It includes an extension ladder that is connected to the center panel. This extension improves the traction of the track.
It has an arc design that reduces the speed and helps to load the snowmobile into the truck’s bed. It has raised ski guides to protect the skis and prevent them from slipping. The side panels are covered with plastic glides to reduce friction and preclude any damage to the ski runners.
The head plate connects with the tailgate or the deck of the truck. It has plastic protection for skis.
To secure the ramp with the truck, it has three ratchet straps. They connect each panel individually with the truck.
If you have a studded track on your snowmobile, you can add stud protectors. It will cost $50 and neglect the risk of damaging the studs. But keep in mind that if you try to load a snowmobile with a studded track, it will void the warranty.
You must register your product within 30 days of purchase to avail of the warranty. You can do it online or by sending an email to the manufacturer.
It costs $460, and the manufacturer also offers a limited lifetime warranty. The ramp is strong and does break easily. It is another good option on my list that I would recommend.
In the end…
It is never a good idea to save a few bucks and risk your expensive snowmobile. These are the best ramps I have used, and I can trust them.
If your truck bed is more than 30 inches in height, Caliber CBR-RAMP-Pro is the best snowmobile ramp for you. You can also use this ramp to load your snowmobile on the deck. For $780 on Amazon, it comes with stud protectors and an extension ladder.
If you want a budget-friendly option, then Ruedamnn’s tri-fold ramp is the best. It requires LowPro glides and stud protectors (if you have a studded track). The ramp costs $370 on Amazon, and the additional guides and the stud protectors cost $60 + $50. The total will be $480.
If you want a ramp for trailer loading, then the Black Ice tri-fold ramp is a perfect choice. It features ski glides and stud protectors, so you do not have to buy these separately.
At $380 on Amazon, it is the perfect bang for the buck. And you can also use it to load your snowmobile in your truck’s bed if the height of your truck’s bed is up to 30 inches.
So, let me know in the comments which ramp you are going to buy.